Free Mock Test Series Indian Coast Guard Bharti 2026 Syllabus
भारतीय तटरक्षक भरती 2026 अभ्यासक्रम
Indian Coast Guard Bharti 2026 Syllabus – The Indian Coast Guard, Assistant Commandant (Group ‘A’ Gazetted Officer) Syllabus has been published on official Site. The selection of Officer Recruits is based on an all India order of merit which is based on the performance of candidate in various stages (I – V) of examination (explained in detail below) and the number of vacancies available for the post. Clearing of Stage I, II, III, IV and V is compulsory for recruitment in ICG. The Stage-I would include conduct of screening Test for the eligible applicants which will be a Computer Based Examination conducted at various centers all over India. More details about the Indian Coast Guard Syllabus 2026 is given below :
ICG Written Exam Pattern For Navik And Yantrik Bharti
भारतीय तटरक्षक दल, सहाय्यक कमांडंट (गट ‘अ’ राजपत्रित अधिकारी) अभ्यासक्रम अधिकृत साइटवर प्रकाशित करण्यात आला आहे. ऑफिसर रिक्रूट्सची निवड अखिल भारतीय गुणवत्तेच्या क्रमवारीवर आधारित आहे जी परीक्षेच्या (I – V) विविध टप्प्यांतील उमेदवाराच्या कामगिरीवर (खाली तपशीलवार स्पष्ट केले आहे) आणि पदासाठी उपलब्ध रिक्त पदांच्या संख्येवर आधारित आहे. ICG मध्ये भरतीसाठी स्टेज I, II, III, IV आणि V चे क्लिअरिंग अनिवार्य आहे. टप्पा-1 मध्ये पात्र अर्जदारांसाठी स्क्रीनिंग चाचणी आयोजित केली जाईल जी संपूर्ण भारतातील विविध केंद्रांवर संगणक आधारित परीक्षा असेल. इंडियन कोस्ट गार्ड अभ्यासक्रम 2026 बद्दल अधिक तपशील खाली दिले आहेत:
तसेच या संदर्भातील पुढील सर्व अपडेट्ससाठी या लिंक वरून आपण आमच्या टेलिग्राम चॅनलला जॉईन करावे किंवा या लिंक वरून महाभरती एक्सामची अधिकृत अँप आपल्या मोबाईल मध्ये डाउनलोड करावी आणि अधिक ताज्या आणि अधिकृत महाराष्ट्र परीक्षेच्या अपडेटसाठी MahaBharti.in/exam फॉलो करा:
Indian Coast Guard Exam Pattern 2026
The details of various stages of examination are as follows:-
(a) Stage-I (CGCAT). The Stage-I would include conduct of screening Test for the eligible applicants which will be a Computer Based Examination conducted at various centers all over India. Screening test is to be conducted for candidates applying for the post of GD/CPL and Technical (Mechanical/Electrical & Electronics). The screening test will be conducted in MCQ pattern with maximum marks of 400 consisting of 100 questions with four marks for each correct answer and one negative marking for each incorrect answer. The duration of the exam will be of two hours and medium of test paper will be English. The candidate has to take following tests depending on post applied:
भारतीय तटरक्षक दल, सहाय्यक कमांडंट (गट ‘अ’ राजपत्रित अधिकारी) अभ्यासक्रम
| Section | Subjects | No of Questions (100 per section) | Duration |
| Section-I (for GD/CPL-SSA entry) | A: English | 25 | 2Hrs |
| B:Reasoning & Numerical Ability | 25 | ||
| C: General Science & Mathematical aptitude | 25 | ||
| D:General Knowledge | 25 | ||
| Section -II (for Mechanical entry) | A:English | 10 | 2Hrs |
| B:Reasoning & Numerical Ability | 10 | ||
| C: General Science & Mathematical aptitude | 10 | ||
| D: General Knowledge | 10 | ||
| E:Mechanical | 60 | ||
| Section-Ill (for Electrical & Electronics entry) | A:Enqlish | 10 | 2Hrs |
| B:Reasoning & Numerical Ability | 10 | ||
| GGeneral Science & Mathematical aptitude | 10 | ||
| D: General Knowledge | 10 | ||
| Electrical & Electronics | 60 |
Stage-II- Preliminary Selection Board (PSB)
Based on the performance in the Stage-I, candidates will be shortlisted for appearing in Stage-II(PSB)which will be conducted for a day at Noida, Mumbai/Goa, Chennai and Kolkata centres. Candidates to give the choice of PSB centre at the time of filling of application form. Candidates will be screened through Computerised Cognitive Battery Test (CCBT) and Picture Perception & Discussion (PP&DT). The CCBT will be in English only and will be of objective type. During PP&DT the candidates are expected to speak and discuss in English. However, they are free to speak in Hindi if they wish to do so. The Stage-II examination is only of qualifying nature i.e. either Pass or Fail.
Stage-III: Final Selection Board (FSB).
The candidates qualifying for Stage-Ill will be intimated on completion of stage-II at respective centres. The schedule of Stage-Ill will be intimated to the candidate on personal Login IDs. The FSB call up letter along with reporting instructions will be intimated to candidates on personal Login IDs. FSB is conducted at the Coast Guard Selection Board (CGSB) located at Noida and spans over five days. The candidates are subjected to Psychological Test, Group Task and Interview (Personality test). All documents/certificates verified during PSB are also required to be produced in originals during FSB. Board conference is held on last day and thereafter recommended candidates are sent for Stage-IV i.e. Special medical examination.
Stage-IV (Medical Examination).
The candidates who clear Stage-Ill are required to undergo a special medical examination at Base Hospital, New Delhi. Candidates declared unfit in Special Medical Board(SMB) are included in the merit list, because the candidates declared unfit in SMB have the liberty to appeal the verdict and will report for appeal medicals at designated service hospital within 42 days of completion of SMB. If declared unfit during appeal medicals, they have the option for asking for a review of the results. In this case, the approval of the review is accorded from Director General of Armed Forces Medical Services (DGAFMS) through Directorate of Medical Services/CGHQ. If the review is approved, the designated hospital for the conduct of the review is indicated in the approval. The decision of Review Medical Board (RMB) will be final and no further appeal will be accepted.
Stage-V (Induction)
The candidates who clear Stage – IV and stand in All India Merit List as per the vacancies available will be provisionally selected for training and will be required to report at INA Ezhimala for Naval Orientation Course (NOC) as per the instructions. All India Merit List will be based on combined marks of Stage-I and Stage-Ill. Candidates reporting at INA Ezhimala for training will first undergo photo and biometric verification.
Syllabus of Assistant Commandant (GD/PN/Women SSA/Law/CPL)
| Section No. | Section | Topic |
|---|---|---|
| Section 1 | English | Comprehension, Usage of Words, Sentence completion / Corrections, Punctuations, Grammar, Vocabulary, Antonyms and Synonyms, Parts of Speech, Direct and Indirect Speech, Idioms and Phrases, Active and Passive Voice.etc (Question paper will be designed to test the candidates’ understanding of English and workmanlike use of Grammar) |
| Section 2 | Reasoning and Numerical Ability | Spatial, Numerical, Reasoning and Associative Ability, Sequences, Spellings, Unscrambling, Coding and Decoding, Missing Numbers / Series Completion, Decimal Fraction, Ratios and Proportion, Average and Volume, Time and Work, Speed and Distance, Market Price, Cash Price, Expenditure Problems, Profit and Loss, Percentage, Factoring (LCM and HCF), Simple Interest and Compound Interest, Mensuration Formulas (Calculation of length, breadth or height of square, rectangle, cube etc) |
| Section 3 | General Science and Mathematical Aptitude | Nature of Matter, Universe, Electricity and its Applications, Force and Gravitation, Newton’s Laws of Motion, Work, Energy and Power, Heat, Temperature, Light, Current, Magnetism, Metals and Non Metals, Measurements, Sound and Wave Motion, Atomic Structure, Chemistry – Carbon and its Compounds, Periodic Table, Acids, Bases & Salts, Food, Nutrition and Health Physiology and Human Diseases and Basic Computer Science Arithmetic Ability, Number Systems, Algebra, Basic Trigonometry, Geometry, Statistics, Probability and Set Theory. |
| Section 4 | General Knowledge | History of India, Geography, Climate / Environment, Civics – Constitution of India, Art, Culture, Dance, Heritage, Religion, Freedom Movement, Important National Facts, Economics, Politics, Sports and Championships, Entertainment, Books and Authors, Awards, Defence and Wars, Geographical Neighbours, Countries – Languages, Capitals, Currencies, Common Name, Full Forms, Abbreviations, Eminent Personalities, National – Bird/ Animal/ Monuments/ Flower/ Anthem/ Sport/ Flag/ Emblem etc, Discoveries and Current Affairs. |
Syllabus of Assistant Commandant (Technical)
Syllabus For Section I
| Section No. | Section | Topic |
|---|---|---|
| Section 1 | English | Comprehension, Usage of Words, Sentence completion / Corrections, Punctuations, Grammar, Vocabulary, Antonyms and Synonyms, Parts of Speech, Direct and Indirect Speech, Idioms and Phrases, Active and Passive Voice.etc (Question paper will be designed to test the candidates’ understanding of English and workmanlike use of Grammar) |
| Section 2 | Reasoning and Numerical Ability | Spatial, Numerical, Reasoning and Associative Ability, Sequences, Spellings, Unscrambling, Coding and Decoding, Missing Numbers / Series Completion, Decimal Fraction, Ratios and Proportion, Average and Volume, Time and Work, Speed and Distance, Market Price, Cash Price, Expenditure Problems, Profit and Loss, Percentage, Factoring (LCM and HCF), Simple Interest and Compound Interest, Mensuration Formulas (Calculation of length, breadth or height of square, rectangle, cube etc) |
| Section 3 | General Science and Mathematical Aptitude | Nature of Matter, Universe, Electricity and its Applications, Force and Gravitation, Newton’s Laws of Motion, Work, Energy and Power, Heat, Temperature, Light, Current, Magnetism, Metals and Non Metals, Measurements, Sound and Wave Motion, Atomic Structure, Chemistry – Carbon and its Compounds, Periodic Table, Acids, Bases & Salts, Food, Nutrition and Health Physiology and Human Diseases and Basic Computer Science Arithmetic Ability, Number Systems, Algebra, Basic Trigonometry, Geometry, Statistics, Probability and Set Theory. |
| Section 4 | General Knowledge | History of India, Geography, Climate / Environment, Civics – Constitution of India, Art, Culture, Dance, Heritage, Religion, Freedom Movement, Important National Facts, Economics, Politics, Sports and Championships, Entertainment, Books and Authors, Awards, Defence and Wars, Geographical Neighbours, Countries – Languages, Capitals, Currencies, Common Name, Full Forms, Abbreviations, Eminent Personalities, National – Bird/ Animal/ Monuments/ Flower/ Anthem/ Sport/ Flag/ Emblem etc, Discoveries and Current Affairs. |
Syllabus For Section II
| Syllabus for Mechanical Engineering | ||
|---|---|---|
| 1. Fundamental Engineering | (a) Engineering Mathematics | Matrix Algebra, Eigen values and Eigen vectors, Theorems of integral calculus, Partial derivatives, Maxima and minima, Multiple integrals, Stokes, Gauss and Green’s theorems. First order differential equation (linear and nonlinear), Cauchy’s and Euler’s equations, Complex variables, Taylor’s and Laurent’ series, Sampling theorems, Mean, Median, Mode and Standard deviation, Random variables, Discrete and Continuous distributions, Fourier transform, Laplace transform, Ztransform. |
| (b) Engineering Physics | Units for measurement, Description of Motion in One, Two and Three dimensions, Laws of Motion, Work, Energy and Power, Rotational Motion, Gravitation, Heat and Thermodynamics, Electrostatics, Electric Current, Magnetic Effect of Currents, Magnetism, Electromagnetic Induction and Alternating Currents and Electromagnetic Waves, Ray Optics and Optical Instruments. | |
| (c) Engineering Graphics / Engineering Drawing | Principles of orthographic projections, projections of points, lines, planes and solids, Section of solids, Isometric views, Auto-CAD. | |
| 2. Specialized Branch topics | (a) Engineering Mechanics | Equations of equilibrium in space and its application; first and second moments of area; simple problems on friction; kinematics of particles for plane motion; elementary particle dynamics. Generalized Hooke’s law and its application; design problems on axial stress, shear stress and bearing stress; material properties for dynamic loading; bending shear and stresses in beams; determination of principle stresses and strains – analytical and graphical; material behaviour and design factors for dynamic load; design of circular shafts for bending and torsional load only; deflection of beam for statically determinate problems; theories of failure. |
| (b) Thermodynamics | Basic concept of First –law and second law of Thermodynamics; concept of entropy and reversibility; availability and unavailability and irreversibility. Classification and properties of fluids; incompressible and compressible fluids flows; effect of Mach number and compressibility; continuity momentum and energy equations; normal and oblique shocks; one dimensional isentropic flow; flow or fluids in duct with frictions that transfer. Flow through fans, blowers and compressors; axial and centrifugal flow configuration; design of fans and compressors | |
| (c) Theory of Machines | Kinematic and dynamic analysis of plane mechanisms. Cams, Gears and epicyclic gear trains, flywheels, governors, balancing of rigid rotors, balancing of single and multicylinder engines, linear vibration analysis of mechanical systems (single degree of freedom), Critical speeds and whirling of shafts. flywheels, balancing of rotors and reciprocating machinery, balancing machines, governors, free and forced vibration of damped and undamped single degree of freedom systems, isolation, whirling of shafts, gyroscope | |
| (d) Fluid mechanics/Hydraulic Machines | Fluid flow concepts – Transport theorem – Fluid kinematics – Potential flow – Governing equations of Fluid flow – Dimensional Analysis – Viscous flow – Boundary Layer flows – Turbulence – Closed conduit flows – Hydrodynamic lubrication – Free surface flow – Compressible flows, Hydraulic Turbines: Impulse and Reaction Turbines – Centrifugal and Axial flow pumps | |
| (e) Manufacturing Science | Foundry Technology, Melting furnaces, Special casting processes, Gating and riser design, Casting defects, Arc welding, TIG, MIG, submerged arc, resistance welding, Gas welding, Flash butt welding, Solid state welding, Welding metallurgy, Forming Technology, Powder metallurgy | |
| (f) Materials Science | Basic concepts on structure of solids; common ferrous and nonferrous materials and their applications; heat-treatment of steels; non-metals- plastics, ceramics, composite materials and nano-materials. | |
| (g) Machine Drawing | Development and Intersection of surfaces, Conventional representation of machine elements, materials, surface finish and tolerances – Sectional views and additional views – Drawing of Screw threads, locking devices, Fasteners, Keys and Cotters, Knuckle joints, Riveted Joints, Shaft Couplings and Bearings – Pipe Joints, Assembly and production drawings | |
| 3. Allied Engineering | (a) Automotive Engineering | Introduction, power plant, fuel system, electrical system and other electrical fittings, lubricating system and cooling systems, chassis and transmission, axles, clutches, propeller shafts and differential, Condition for correct steering, steering gear mechanisms, automotive air conditioning, Tyres, effect of working parameters on knocking, reduction of knocking; Forms of combustion chamber for SI and CI engines; rating of fuels; additives; emission. |
| (b) Power Plant Engineering | Steam power plant, steam boilers, steam condensers, cooling towers, cogeneration and combined cycles, nuclear power plants, hydroelectric power plants, power plant economics. | |
| (c) Industrial Engineering | System design: factory location- simple OR models; plant layout – methods based; applications of engineering economic analysis and break- even analysis for product selection, process selection and capacity planning; predetermined time standards. System planning; forecasting methods based on regression and decomposition, design and balancing of multi model and stochastic assembly lines; inventory management – probabilistic inventory models for order time and order quantity determination; JIT systems; strategic sourcing; managing inter plant logistics. | |
| (d) Flight Mechanics | Atmosphere: Properties, standard atmosphere. Classification of aircraft. Airplane (fixed wing aircraft) configuration and various parts. Airplane performance: Pressure altitude; equivalent, calibrated, indicated air speeds; Primary flight instruments: Altimeter, ASI, VSI, Turn-bank indicator. Drag polar; takeoff and landing; steady climb & descent,-absolute and service ceiling; cruise, cruise climb, endurance or loiter; load factor, turning flight, V-n diagram; Winds: head, tail & cross winds. Static stability: Angle of attack, sideslip; roll, pitch & yaw controls; longitudinal stick fixed & free stability, horizontal tail position and size; directional stability | |
| (e) Aircraft Structures | Stress and Strain: Equations of equilibrium, constitutive law, straindisplacement relationship, compatibility equations, plane stress and strain, Airy’s stress function. Flight Vehicle Structures: Characteristics of aircraft structures and materials, torsion, bending and flexural shear. Flexural shear flow in thinwalled sections. Buckling. Failure theories. Loads on aircraft. Structural Dynamics: Free and forced vibration of discrete systems. Damping and resonance. Dynamics of continuous systems | |
| (f) Aerodynamics | Basic Fluid Mechanics: Incompressible irrotational flow, Helmholtz and Kelvin theorem, singularities and superposition, viscous flows, boundary layer on a flat plate. Airfoils and wings: Classification of airfoils, aerodynamic characteristics, high lift devices, KuttaJoukowski theorem; lift generation; thin airfoil theory; wing theory; induced drag; qualitative treatment of low aspect ratio wings. Viscous Flows: Flow separation, introduction to turbulence, transition, structure of a turbulent boundary layer. Compressible Flows: Dynamics and Thermodynamics of I-D flow, isentropic flow, normal shock, oblique shock. | |
| Syllabus for Electrical & Electronics Engineering | ||
| 1. Fundamental Engineering | (a) Engineering Mathematics | Matrix Algebra, Eigen values and Eigen vectors, Theorems of integral calculus, Partial derivatives, Maxima and minima, Multiple integrals, Stokes, Gauss and Green’s theorems. First order differential equation (linear and nonlinear), Cauchy’s and Euler’s equations, Complex variables, Taylor’s and Laurent’ series, Sampling theorems, Mean, Median, Mode and Standard deviation, Random variables, Discrete and Continuous distributions, Fourier transform, Laplace transform, Ztransform. |
| (b) Engineering Physics | Units for measurement, Description of Motion in One, Two and Three dimensions, Laws of Motion, Work, Energy and Power, Rotational Motion, Gravitation, Heat and Thermodynamics, Electrostatics, Electric Current, Magnetic Effect of Currents, Magnetism, Electromagnetic Induction and Alternating Currents and Electromagnetic Waves, Ray Optics and Optical Instruments. | |
| (c) Engineering Drawing | Projection of straight line, planes and solids, Intersection of surfaces, Isometric Projection, Sectional Views of solids, Full section, Introduction to ComputerAided Drafting | |
| 2. Specialized Branch topics | (a) Analog and Digital Electronics | Characteristics of diodes, BJT, FET, JFET and MOSFET, Amplifiers – biasing, equivalent circuit and frequency response, Oscillators and feedback amplifiers, Operational amplifiers – characteristics and applications, Simple active filters, VCOs and timers, Combinational and sequential logic circuits, Multiplexer, Schmitt trigger, Multi-vibrators, Sample and hold circuits, A/D and D/A converters, 8-bit microprocessor basics, architecture, programming and interfacing. |
| (b) Electrical Engineering | Single phase transformer – equivalent circuit, phasor diagram, tests, regulation and efficiency, Three phase transformers – connections, parallel operation, Autotransformer; Energy conversion principles, DC machines – types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors, Single phase and Three phase induction motors – principles, types, performance characteristics, starting and speed control, Starting motors, Servo and stepper motors, Synchronous machines Generators – performance, regulation and parallel operation. | |
| (c) Electronic Devices | Energy bands in Silicon, Intrinsic and extrinsic Silicon, Carrier transport in Silicon – diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers, p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, PIN and avalanche photo diode, Basics of LASER. Device technology – integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin-tub CMOS process. | |
| (d) Control Engineering | Application of open loop and closed loop systems, Principles of feedback, Determination of transfer function by block diagram reduction method, Time domain analysis of first and second order systems, transient and steady-state errors, damping and oscillations, Routh and Nyquist techniques, Bode plots, Root loci, Lag, lead and lead-lag compensation, State space model, State transition matrix, Controllability and observability. | |
| (e) Telecommunication Systems | Random signals and noise – probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication – amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers, elements of hardware, realisations of analog communication systems, signal-to-noise ratio (SNR) calculations for AM and FM. Fundamentals of information theory and channel capacity theorem. Digital communication systems – Pulse Code Modulation (PCM), Differential Pulse Code Modulation (DPCM), Digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), Matched filter receivers, Bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA. Fundamentals of mobile communication. Fundamentals of optical fibre communication. | |
| (f) Microwave Engineering | Wave guides, Waveguide components, Klystrons, Travelling Wave Tubes, Magnetron, Microwave measurements, Introduction to microstrip lines, Microwave network analysis, Microwave semiconductor devices, Monolithic microwave integrated circuits. | |
| (g) Antenna and Wave Propagation | Antenna parameters, Radiation from a current element in free space, Reciprocity theorem, Resonant and non-resonant antenna, Effective length and aperture, gain, beamwidth, directivity, radiation resistance, efficiency, polarization, impedance and directional characteristics of antenna, antenna temperature. Phased array antenna, Mechanism of radio wave propagation, Reflection, refraction, interference and diffraction of radio waves. Theory of ground wave, space wave, sky wave and troposcatter propagation. | |
| 3. Allied Engineering Topics | (a) Instrumentation | Accuracy, precision and repeatability, Electronic instruments for measuring basic parameters, Theory of Oscilloscopes, Signal generators, Signal analysers, Characteristics and construction of transducers. |
| (b) Computer Networks | ISO/OSI stack, LAN technologies (Ethernet, Token ring), Flow and error control techniques, Congestion control, TCP/UDP and sockets, IPv4, Application layer protocols (icmp, dns, smtp, pop, ftp, http); Basic concepts of hubs, switches, gateways, and routers. | |
| (c) Network Theory Design | Thevenin’s, Norton’s, Reciprocity, Superposition, Compensation, Miller’s, Tellegen’s and Maximum power transfer theorems. Impulse, step, ramp and sinusoidal response analysis of first order and second order circuits. Two port parameters and their interrelations, Application of Laplace transform and Fourier series in the context of network analysis, Network synthesis. | |
| (d) Switching Theory | Traffic definitions, Introduction to switching networks, classification of switching systems. Grade of Service, Basics of Circuit switching and packet switching. | |
| (e) Information Technology | Fundamentals of operating system, RDBMS terminologies, Object Oriented Programming, Basics of computer graphics. | |
| (f) Radar Theory | Radar range equation, Frequencies of operation, fundamentals of Moving Target Indicator (MTI), Pulse Doppler Radar, Tracking radar. | |
Tentative Schedule for Examination
Note: The last date of induction at INA will tentatively be 27 Dec 2026. The exact date will be mentioned in Appointment letter. No further induction will be undertaken after 31 Dec 2026 under any circumstance.
Headquarters Coast Guard Region Syllabus
Indian Coast Guard Bharti 2026 Syllabus – As Per recent advertisement of Indian Coast Guard For Headquarters Coast Guard Region West various Vacancies has been announced. In this, recruitment process is carried out in three ways : Scrutiny Of Application, Document Verification and Written Examination. After clearing the Indian Coast Guard Written Exam candidates Merit List will be prepared. The qualifying marks in written exam is 50% and those candidates who qualify written test will be called for Trade test if applicable as per posts. In case of SC and ST qualifying Marks will be 45%. Other Important details regarding Indian Coast Guard Bharti 2026 Syllabus, Indian Coast Guard Bharti 2026 Exam Pattern are as follows, Download Indian Coast Guard Bharti 2026 Syllabus PDF from below link :
भारतीय तटरक्षक दलाच्या अलीकडील जाहिरातीनुसार मुख्यालय तटरक्षक क्षेत्र पश्चिमसाठी विविध रिक्त पदांची घोषणा करण्यात आली आहे. यामध्ये, अर्जाची छाननी, कागदपत्रांची पडताळणी आणि लेखी परीक्षा या तीन प्रकारे भरती प्रक्रिया पार पाडली जाते. भारतीय तटरक्षक लेखी परीक्षा (Headquarters Coast Guard Region West Exam Pattern 2026) उत्तीर्ण झाल्यानंतर उमेदवारांची गुणवत्ता यादी तयार केली जाईल. लेखी परीक्षेतील पात्रता गुण ५०% आहेत आणि जे उमेदवार लेखी परीक्षेत पात्र आहेत त्यांना पदांनुसार लागू असल्यास ट्रेड चाचणीसाठी बोलावले जाईल. SC आणि ST पात्रतेच्या बाबतीत गुण 45% असतील. भारतीय तटरक्षक भरती 2026 अभ्यासक्रम, भारतीय तटरक्षक भरती 2026 परीक्षा पॅटर्न यासंबंधीचे इतर महत्त्वाचे तपशील खालीलप्रमाणे आहेत.
Headquarters Coast Guard Region West Exam Pattern 2026
- Offline Written Exam(Pen Paper Based)
- Question Paper Language – Bilingual
- No Of Question – 80 Objective Type
- No Of Marks – 1 Marks For Each Correct Answer
- Negative Marking – NO
Indian Coast Guard Bharti 2026 Written Exam Pattern
| Subject | No Of Question |
| General Knowledge | 20 |
| Mathematics | 20 |
| General English | 20 |
| Questions On Relevant Trade | 20 |
Indian Coast Guard Bharti 2026 Syllabus
| Subject | Syllabus |
| General Knowledge |
|
| Mathematics |
|
| General English |
|
| Questions On Relevant Trade | On Give Trade |
Maximum Marks Required For Indian Coast Guard Exam 2026
- उमेदवारांना प्रथम लेखी परीक्षेला बसणे आवश्यक आहे. लेखी परीक्षेत वस्तुनिष्ठ स्वरूपाचे प्रश्न असतील. लेखी परीक्षेच्या तारखेला उमेदवारांनी मूळ कागदपत्रे आणणे आवश्यक आहे.
- लेखी परीक्षेसाठी उत्तीर्ण गुण ५०% असतील. SC आणि ST उमेदवारांच्या बाबतीत, पात्रता गुण 45% असतील.
- जे उमेदवार लेखी परीक्षेत उत्तीर्ण होतील त्यांना जेथे लागू असेल तेथे व्यापार चाचणीसाठी बोलावले जाईल. त्यानुसार अंतिम गुणवत्ता यादी तयार केली जाईल.
Selection Process For ICG Bharti Exam 2026
(a)Scrutiny of Applications. All applications received from the candidates will be scrutinized subject to the eligibility criteria and necessary documents and the admit cards will be issued to the shortlisted candidates for documents verification & appearing in the written examination.
(b)Document Verification. All the shortlisted candidates will undergo document verification prior appearing in the written examination. Candidates will be required to bring their original documents and self-attested Xerox copies (02 sets) of the same as per the directives/ instructions given in their admit cards.
1 thought on “Indian Coast Guard Bharti 2026 Syllabus – भारतीय तटरक्षक भरती 2026 अभ्यासक्रम”
Indian Coast Guard Bharti 2026 Syllabus PDF