स्थापत्य अभियांत्रिकी सराव प्रश्नपत्रिका क्रमांक ३ | Civil Engineering Practice Test 3

Civil Engineering Practice Test 3

Telegram Group Join Now
Join Instagram Join Now

Civil Engineering Practice Test 3 : We are starting Civil Engineering practice question paper according to new syllabus and changing exam pattern. In this we are going to take important “Topics” practice questions for Civil Engineering Technical Subject. So let’s begin………

Civil Engineering Questions and Answers |  Civil Engineering Objective Questions and Answer

स्थापत्य अभियांत्रिकी सराव चाचणी 1 : आम्ही नवीन अभ्यासक्रमानुसार आणि बदलत्या परीक्षेच्या पद्धतीनुसार स्थापत्य अभियांत्रिकी सराव प्रश्नपत्रिका सुरू करत आहोत. यामध्ये आपण स्थापत्य अभियांत्रिकी तांत्रिक विषयासाठी महत्त्वाचे “विषय” सराव प्रश्न घेणार आहोत. चला तर मग सुरुवात करूया……..

तसेच या संदर्भातील पुढील सर्व अपडेट्ससाठी या लिंक वरून आपण आमच्या टेलिग्राम चॅनलला जॉईन करावे किंवा या लिंक वरून महाभरती एक्सामची अधिकृत अँप आपल्या मोबाईल मध्ये डाउनलोड करावी आणि अधिक ताज्या आणि अधिकृत महाराष्ट्र परीक्षेच्या अपडेटसाठी MahaBharti.in/exam फॉलो करा:

Click Here For All Civil Engineering MCQ Practice Tests For Maharashtra Exam

1003
Created on By MahaBharti Exam Team
Civil Engineering Practice Test 4

Civil Engineering Practice Test 3

महाराष्ट्रातील सर्व भरती परीक्षेस उपयुक्त नवीन IBPS/TCS पॅटर्न नुसार प्रश्न

1 / 15

Theory of probability is applied to _____

2 / 15

The usual mix adopted for cement concrete for R.C.C. pipes in ________

3 / 15

Two pipe system are said to be equivalent when

4 / 15

Which of the following statement is incorrect?

5 / 15

Digonal tention in beam ______

6 / 15

The horizontal component of force on a curved surface is equal to

7 / 15

A 30m chain was found to be 20 cm too long after chaining 1500m. The correct length of the total distance chained will be

8 / 15

If n observations are taken, then accidental errors are proportional to

9 / 15

A fluid is a substance that ________

10 / 15

Dissolve organic solids in wastewater treatment may be removed by

11 / 15

If total hardness and alkalinity of a sample of water are 300mg/I and 100 mg /i (CaCO3 scale) respectively, then its carbonate and non-carbonate hardness (in units of mg/i) will be respectively

12 / 15

If the modular ratio is 'm', effective depth is D, and stress ratio is r [0th/0cbc], then the depth of neutral axis of a balanced section is ____

13 / 15

Given the following data sedimentation tank : Volume of tank = 10 m x 50 m x Flow rate = 500 m/day The retension time would be _______

14 / 15

Two reservoirs at different levels are connected by two parallel pipes of diameter 2d and d. The ratio of flows in the two pipes (large smaller) is _____

15 / 15

Most probable value of an observed quantity available from a given set of observation is the one for which the sum of the square of errors is minimum this statement is called _______

Your score is

The average score is 36%

0%

Leave a Comment


Available for Amazon Prime